Your car deserves the best treatment, which is the reason why you park it safely in your garage or to the farthest reaches of the lot. You make sure your car is safe before entering the shopping mall, as you do not want a careless shopper to craft a screechy line on your car door.
Before we discuss how to repair car scratch, it is important to know that all scratches are not same.
Analysis of a Scratch
All car scrapes are not equal. Some lines that seem like a “scratch” may not even be a “scratch”. Sometimes a rubber bumper or a wooden post rubs against the car paint and deposits dirt materials on the paint surface. These deposits look like a deep scratch, but they are not.
In case the substance rubbing against the car paint is harsher, your loved car gets damaged. Some scratches are not so stubborn and can be easily removed. However, some scratches refuse to leave the surface of your car.
Some scratches only have an impact on the clear coat and colour, but some travel deep down to the primer and reach the metal. If you can still see some paint below, you can repair car scratch with attentive waxing, sanding and buffing. However, if the scrape has already reached the primer or the metal, it is tough to remove.
Repair Car Scratch
Differentiating a scratch from a dent is not so difficult. You do not need any modern tools to see the difference. Use your fingernail to check if it is a deposit on the surface of the paint or a deep scratch that went deep into the primer.
You can use an adhesive remover or an aerosol tar to fix the marks made by rubber, plastic or other paint. These kinds of marks are easy to handle. Obstinate marks can be removed using lacquer thinner or acetone. Stubborn marks sometimes demand hard-work to be removed. If the mark refuses to go away, try hand rubbing the mark or using some polishing substance.
When the mark is gone, rub the affected area back and forth to diminish persisting buffing marks. Take a clean cloth to rub away any remaining substance on the paint. Finally, using a fresh sponge pad, clear the space and polish it with a brightening compound. This will help you remove the fine scratches if any. To correctly repair car scratch, use a rubbing compound and then seal the vehicle surface with a high-quality car wax.
You need to analyse the depth of the car scratch before beginning with the repair work. Check every inch of the scratch. Sometimes the scratch that looks fine at the beginning goes deep down. Check how deep the scratch is. Is it beneath the primer? Or is it just on the colour? Also, check the size of the scratch. If it is a small portion, you can repair car scratch on your own or ignore until the time you are not planning to repaint the panel.
Latest cars are mostly clear coated above the car colour layer. This clear coat prevents the colour pigments from fading away due to ultraviolet rays and provides shine to the motor vehicle surface. Scratches on the clearcoat are not hard to remove. You can simply sand out the scratches on the clear coat.
However, if the scratch is deeper than you think, sanding the surface can worsen the situation. You may have to re-spray the coat if particles from the sandpaper get deposited into the colour underneath. The condition worsens if the colour of the spray does not match the original paint.
To stay away from these issues, consider consulting a professional to repair car scratch or a car paint repairs. Consulting a professional is always time-effective and safe. Dent and Scratch services the South Eastern Melbourne area. If you have a bingle, call 0447-847-655 anytime.